Weapon Maintenance That Every Weapon Owner Should Know

Finally, clean the rest of your weapon with a shattering cloth. The Hardware Spring Hill site offers a wide range of weapon cleaning kits, cleaning sprays, oils, towels, mats and accessories. Our staff is professional and knows the appropriate firearms, weapon safety and cleaning techniques. If you are not sure which weapon cleaning products should be used for your weapon, please come in and one of our personal experts will be happy to help you. We bring the best weapons maintenance and preservation brands to Hoppes, Birchwood Casey and Break Free.

We believe that a combination of weapon cleaning information will help develop or supplement cleaning routines. We refine the process with our 6 simple tips for cleaning weapons so that your weapon lasts a lifetime. I appreciate your recommendation to brush the barrel a second time with a dry cloth to make sure it is clean. My wife just inherited a gun from her grandfather when he died a few weeks ago and needs to be cleaned.

Caliber solvents are generally intended for dirty copper or dirty lead. Of course, use a copper solvent if you fired bullets with a shirt or copper. Armory Den If you shot lead without a shirt, choose a bleaching solution. I prefer cotton stains because they are more absorbent than nylon stains.

Very small pieces are dropped in solvent for soaking in a clean container. My favorite weapon cleaning solvent is the bottom of an empty water bottle that has been cut about 3 inches from the floor. This allows me to soak small pieces and then dip my brush and plaster into it without contaminating the entire bottle of solvent. If you are using bad cleaning bars, cheap brushes, faulty cleaners and an average shooter, it is still quite difficult to damage the rifle.

Pour some solvent into another container and work from there. Let the brush run through the barrel several times until all the copper dust and residues begin to break. Follow the instructions in the solvent bottle as some work best when you pass a wet plaster and let it sit a little to loosen things. I like brushing the barrel 20 times before putting a clean stain on a gag to see if it comes out clean.

It only takes a minor misalignment or a back spring to stop your weapon. So find an area that you can call a weapon cleaning area so that every time you have weapons to clean, you know exactly where you will clean them. Carved room in your garage like me or in an office or a free space. If you don’t have such an additional room, take a stable folding table that you can set up anywhere. Keep your cleaning set so close to the table that everything is in one place.

Apply a few drops of weapon conditioner or lubricant to the cotton mop and let it run through the hole to leave a light layer of weapon oil in it. Spray the bolt on a removed bolt with an action cleaner. There are also many great options to choose from here. Then immerse a tip Q in a powdered solvent and clean the front of the bolt, including the puller. You may want to disassemble the bolt from time to time to clean the firing pin and lubricate the appropriate parts. A little fat where the ears contact is never a bad thing.

If you do not see any visible improvement after five to seven dry spots, repeat the process from the beginning, starting with wet spots. Disassembly of the weapon according to the manufacturer’s instructions. Rub the inside of the barrel with a drilling brush.

It seems to me that this stays good in the cold and continues to lubricate after many shots. My choice for fine oil is Marine Tuf-Glide from Sentry Solutions with a needle oiler. I like Fire Clean for areas with large carbon structures. An overlooked aspect of weapon maintenance is to keep your cleaning tools flawless. In this article, author Jim Shults gave advice on how to keep cleaning bars flawless and brush bristles with a brake cleaner and paper towel. Every time you use a weapon, it is important that it is properly cleaned.